Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
Torque wrench (Not included)
–
Gather the tools required for setup.
3
No parts required
–
Determine where on the cutting unit to
install the groomer.
Extended splined insert (right-hand
threads)
3
Extended splined insert (left-hand
threads)
2
4
Flange locknut (3/8 inch)—Model 03768
only
10
Prepare the cutting unit.
Weight bracket
5
Hex-socket, button-head bolt (3/8 x 3/4
inch)
10
Groomer drive box (left drive)
3
5
Groomer drive box (right drive)
2
Install the weight bracket and groomer
drive box.
Hex-socket bolt
10
Pivot hub
5
O-ring
5
Idler assembly (left)
2
Idler assembly (right)
3
Flange locknut (3/8 inch)—Model 03763
only
10
6
Jam locknut (3/8 inch)—Model 03768
only
10
Install the idler assembly.
Left HOC bracket assembly
5
Right HOC bracket assembly
5
Shoulder bolt
10
Hardened washer
5
7
Flange locknut (3/8 with 5/8 hex)
10
Install the HOC bracket assemblies and
the front roller.
8
Cap
5
Install the groomer drive cap (For
universal groomer assemblies with no
rear roller brush kit installed only).
Bolt (1/4 x 1-1/2 inches)
20
Jam nut
20
Shaft clamp
20
9
Grooming reel (order separately)
5
Install the groomer assembly and
optional broomer kit.
10
Washer (Part No. 3256-24, not included)
–
Adjust the groomer spring force.
11
Hydraulic fitting—45° (Part No.
340–101; sold separately)
1
Install the angled fitting (for Reelmaster
3550 and 3555 machines, #1 front,
center cutting location and kit Model
133-0150).
2
Содержание 03763
Страница 21: ...Notes...