Toro 03763, Руководство по установке

Страница: 7 / 24

7
Installing the HOC Bracket
Assemblies and the Front
Roller
Parts needed for this procedure:
5 Left HOC bracket assembly
5 Right HOC bracket assembly
10
Shoulder bolt
5 Hardened washer
10 Flange locknut (3/8 with 5/8 hex)
Procedure
1. Loosely install the left and right HOC bracket
assemblies and the front roller assembly to the
cutting-unit side plates using the previously
removed carriage bolts (
Figure 10 ).
g347009
Figure 10
1. Right HOC bracket
assembly 4. Washers
2. Front roller assembly 5. Carriage bolt and flange
locknut (3/8 with 5/8 inch
hex)
3. Left HOC bracket
assembly
2. Apply medium-strength cylindrical bonding
retaining compound (such as Blue Loctite 242
® )
to the shoulder bolts prior to installing the
adjuster arms to the groomer drive box and the
idler assembly.
3. On the groomer box side, position the
adjuster-arm rod of the HOC bracket on the
inside of the groomer drive box and secure it
with a shoulder bolt and a hardened washer as
shown in
Figure 11 ; torque the shoulder bolt to
16 to 22 N
⋅
m (12 to 16 ft-lb).
Note:
The shoulder bolt must be installed from
the inside of the machine to the outside of the
machine.
g346924
Figure 11
1. Shoulder bolt 3. Hardened washer
2. Adjuster-arm rod
4. Groomer drive box
7