Toro 03763, Руководство по установке

Страница: 6 / 24

g346923
Figure 8
1. Weight bracket 4. Thread-locking compound
2. Hex-socket, button-head
bolt—3/8 x 3/4 inch (2) 5. Hex-head (Torque to 135
to 150 N∙m (100 to 110
ft-lb))
3. Groomer drive box (left
drive shown)
3. Apply medium-strength thread-locking
compound (such as Blue Loctite® 243) to the
threads of the internal reel shaft (
Figure 8 ).
4. Attach the groomer drive box to the reel shaft
(
Figure 8 ) using the hex-head on the groomer
drive box.
Important:
The reel threads on the left side
of the cutting unit are left-handed, and the
reel threads on the right side of the cutting
unit are right-handed.
5. Restrain the cutting reel; refer to Restraining the
Reel for Installing Threaded Inserts (page 20) .
6. While the reel is restrained, torque the hex-head
of the drive-box shaft to 135 to 150 N∙m (100 to
110 ft-lb); refer to
Figure 12 .
Important:
Torque the hex head of the
drive-box shaft to 135 to 150 N∙m (100 to 110
ft-lb).
Important:
Use a 6-point socket with heavy
wall.
Important:
Do not use an impact wrench for
this step.
Important:
Allow the thread-locking
compound to cure for 15 minutes before
continuing the procedure.
6
Installing the Idler
Assembly
Parts needed for this procedure:
10 Hex-socket bolt
5 Pivot hub
5 O-ring
2 Idler assembly (left)
3 Idler assembly (right)
10 Flange locknut (3/8 inch)—Model 03763 only
10 Jam locknut (3/8 inch)—Model 03768 only
Procedure
1. Position the idler assembly on the opposite side
of the reel from the groomer drive box.
2. Install the O-ring onto the pivot-hub assembly.
3. Apply anti-seize compound on the outside
diameter of the pivot-hub assembly (
Figure 9 ).
g037106
Figure 9
1. Locknut—3/8 inch (2) 4. O-ring
2. Hex-socket bolt (2) 5. Idler assembly (right side
shown)
3. Pivot hub 6. Apply anti-seize
compound on the outside
diameter of the hub.
4. Secure the pivot hub over the idler assembly to
the reel using 2 hex-socket bolts (
Figure 9 ).
5. Loosely install the 2 locknuts on the pivot hub
(
Figure 9 ).
6