Toro 03763, Руководство по установке, Страница: 15 / 24

Height-of-Cut (HOC) and Height-of-Groom (HOG) Recommended Range
Recommended HOG = HOC -
Groomer Engagement
Recommended HOG = HOC -
Groomer Engagement
Height-of-Cut
(mm)
Height-of-Cut
(inch)
Number of
Rear Roller
Spacers
(mm) (inch)
6.3 0.250 0 3.1 to 6.3 0.125 to 0.250
9.5 0.375 0 4.7 to 9.5 0.187 to 0.375
9.5 0.375 1 4.7 to 9.5 0.187 to 0.375
12.7 0.500 0 6.3 to 12.7 0.250 to 0.500
12.7 0.500 1 6.3 to 12.7 0.250 to 0.500
12.7 0.500 2 6.3 to 9.5 0.250 to 0.375
15.8 0.625 0 9.5 to 15.8 0.375 to 0.625
15.8 0.625 1 9.5 to 15.8 0.375 to 0.625
15.8 0.625 2 9.5 to 12.7 0.375 to 0.500
19.0 0.750 1 12.7 to 19.0 0.500 to 0.750
19.0 0.750 2 12.7 to 19.0 0.500 to 0.750
19.0 0.750 3 12.7 to 15.8 0.500 to 0.625
22.2 0.875 1 15.8 to 22.2 0.625 to 0.875
22.2 0.875 2 15.8 to 22.2 0.625 to 0.875
22.2 0.875 3 15.8 to 19.0 0.625 to 0.750
25.4 1.00 2 * 19.0 to 25.4 0.750 to 1.00
25.4 1.00 3 19.0 to 25.4 0.750 to 1.00
25.4 1.00 4 19.0 to 22.2 0.750 to 0.875
Note:
Maximum HOG recommended is half the HOC to 6 mm (1/4 inch) maximum engagement
* Move the groomer front height-of-cut (HOC) bracket to the bottom (cutting unit location) side-plate hole.
Changing the Groomer
Operating Direction
The groomer has 3 settings: N
EUTRAL
(N), F
ORWARD
(F), and R
EVERSE
(R). To change the direction of the
groomer, turn the knob at the end of the groomer drive
box and align the desired position with the adjustment
notch.
g302776
Figure 24
1. Adjustment notch 2. Knob
15