6
2 - Operation and maintenance
TO320 M - EN - Ed. 04.09
• Use of the equipment, even partial, by personnel not expressly authorized by the Company man
-
agement is forbidden.
• The workshop manager and foreman are responsible for training and ensuring training of the per
-
sonnel who will be using the equiment.
• It is forbidden to use the tooling for the purposes other than those envisaged.
• Carefully read the warning and hazard notices applied on the machine.
• Do not remove the warning and hazard notices from the machine.
• Do not carry out maintenance, repair, modification or anything that is not strictly necessary for the
work cycle with the machine running. First of all, the electrical and compressed air supplies to the
machine must be disconnected.
• Do not remove the guards and safety devices provided on the machine.
• Do not start work with the guards open or open these during the working.
• Work on the machine using the safety gloves.
• At the end of the working period, always disconnect the machine from the electricity and compressed
air supplies.
• All electrical and non electrical maintenance must be carried out in accordance with the regulations
in force.
• Do not use the valve for inflammable liquids or with solid parts that can explode.
It is also forbidden to start up before the machine/plant in which the equipment is to be installed
is declared as conforming to the provisions of Machinery Directive.
PROTECTION DEVICES TO BE PROVIDED BY THE INSTALLER
The plant installer/installation technician is responsible for providing and installing all the protection
devices to avoid damage to objects or persons in case of breakage and consequent falling of pieces
from the machine (for eg. motor breakage).
- There is a potential hazard if the inlet and outlet spouts of the machine are not connected, so warn-
ing notices must be applied on the machine and the area must be cordoned off, if necessary using
suitable systems (user’s responsibility).
Содержание VDC 200
