2 - Operation and maintenance
3
TO320 M - EN - Ed. 04.09
SCOPE AND IMPORTANCE OF THE MANUAL
2.
This Manual, prepared by the Manufacturer, is an integral part of the VDC and must therefore accom-
pany it right up to its dismantling and must be easily available for rapid consultation by the operators
concerned and the manager of the site operations.
If the machine changes ownership, the Manual must be handed over to the new owners. Before
carrying out any operation with or on the VDC, the workers concerned must have read this Manual
carefully.
If the Manual is lost, damaged or becomes illegible, download a copy from the TOREX® website and
check the date of the latest version.
The Manual provides warnings and indications concerning the safety standards for accident-prevention
at the workplace. However, and in any case, the various operators must strictly follow the safety
regulations that concern them as imposed by the standards in force.
Modifications, if any, to the safety standards, made over time must be
duly implemented
.
With the basic features of the machine remaining unchanged, the manufacturer reserves the
right to make modifications, if necessary, to parts, details or accessories considered to be
necessary for improvement of the product or for constructional or commercial requirements,
at any moment and without any obligation to update this publication promptly.
The latest version of this catalogue is available on our website
www.wamgroup.com
ADDRESS OF DEALER OR LOCAL SERVICE POINT
WARRANTY CONDITIONS
3.
TOREX® Spa acknowledges a 12-months warrantee on products manufactured by it. The period
comes into effect from the date on the delivery note.
The warrantee is not applicable to breakages and/or defects caused by incorrect installation or use,
or incorrect maintenance or modifications made without the manufacturer’s permission.
The warrantee is not applicable to parts subject to normal wear and electrical parts.
Specifically, the warrantee lapses if the VDC:
- has been tampered with or modified,
- has been used incorrectly,
- has been used without respecting the limits indicated in this Manual and/or has been subjected to
excessive mechanical stresses,
- has not be subjected to the necessary maintenance or the maintenance operations have been
carried out only partly and/or incorrectly,
- has been damaged owing to negligence during transport, installation and use,
- the spare parts inserted are not genuine.
On receiving the product, the customer must check to make sure there are no defects or damages
deriving from transport and/or that the supply is complete.
The manufacturer must be immediately informed of defects, damage or incompleteness, if any, with
a written communication countersigned by the carriers.
Содержание VDC 200
