GIRE-097-2-2
51
8. Replacement of Element Fixing Gaskets
Please at first lift "TMR090 Series" modules out of the tank according to the lifting procedure
described above and take the following steps to replace the element fixing comb gaskets
(EPDM rubber). The bolt size is M10.
(1) Remove the three element fixing brackets
from the element block (one center bracket and
two side brackets).
(2) Replace the comb gaskets from each bracket.
The gaskets consist of several parts according to
the type of module. Detailed information will be
provided separately.
(3) Install element fixing brackets on the
element block.
After installation, check that comb gaskets are
touching elements flat.
Take care not to damage the gaskets (EPDM rubber) of the
element fixing bracket.
CAUTION
!
