GIRE-097-2-2
22
4. Piping
The procedures of the pipe arrangement for the air diffusers and the permeate water
manifold are described in this section. The connections of the air diffuser and the permeate
water manifold are shown in the module drawings attached to this manual.
(1) Pipe Arrangement for the air diffusers
The pipe from the air supply device (the blower) is connected to the air diffusers with the
screws (A) as shown in Fig.IV-9-11. It is recommended to install the flange connection (B)
above the liquid surface on this line in order to disjoint the piping in the case of lifting the
modules.
Fig.IV-9 Example of Piping to Air diffusers for TMR090-050S
B
A
B
Air Diffuser
Header Pipe
PG
Air flow Meter
