GIRE-097-2-2
12
*4 Except when the chemical cleaning with the designated chemical agents.
*5 The connecting socket has an internal thread. The use of tapered screw is recommended for screw
connections.
*6 “NL” means air volume as being 0 degree C and 101.325 kPa (1 atm).
Table III-4 and III-5 show the performance of "TMR090 Series" modules.
Table III-4 Permeate water quality
Model name
TMR090-050S
TMR090-100S
Permeate
water
quality
*1
TSS (mg/L)
*2
Not higher than 3.0
Turbidity (NTU)
*3
Not higher than 1.0
*1 This value is a guarantee value of Toray that can be attained when the modules are installed and
operated appropriate under the standard conditions as specified in this Instruction Manual and
Operation and Maintenance Guideline during a period specified separately by Toray.
*2 Measuring method of TSS is complied with Standard Method of Examination of Water and Wastewater
20
th
Edition (1998), Section 2540D, Total Suspended Solids Dried at 103-105 degree C or ISO 11923.
*3 Measuring method of NTU is complied with Standard Method of Examination of Water and Wastewater
20
th
Edition (1998), Section 2130, Turbidity or ISO 7027.
Table III-5 Flow capacity (Reference value)
Model name
TMR090-050S
TMR090-100S
Continuous
Filtration Flow
(m
3
/d)
Sewage
5 - 35
10 - 70
Industrial wastewater
5 - 23
10 - 46
*4 This value is just a reference value and is not a guarantee value of Toray. Sustainable operating
filtration flow capacity varies among the plant depending on the type of wastewater, total process
design and operating condition. In case of industrial wastewater application, it is strongly recommended
to conduct a pilot test before membrane tank designing.
