Topex 44E102, Инструкция по эксплуатации

Страница: 6 / 24

6 TOPEX.PL
Aby zredukować płomień i temperaturę należy obrócić
pokrętło w lewo. Przez obracanie w prawo uzyskuje się
odpowiednio zwiększenie płomienia i temperatury.
Zgaszenie płomienia
Obrócić w lewo pokrętło zaworu gazu w skrajne
położenie, odcinamy dopływ gazu do dyszy co prowadzi
do zaniku płomienia.
MICROTORCH
44E102
OPERATIONAL SAFETY
The microtorch has no temperature indicator. Careless
environment and observe applicable safety measures.
CAUTION !
Do not put the microtorch nozzle close to face and 1.
hands. There is risk of burns.
The nozzle heats up very much during microtorch 2.
operation. High temperature remains for some time
3.
materials.
Before storing ensure that gas valve wheel is turned 4.
Do not store the gas torch in temperature above 5.
40°C (104ºF) or in direct sunlight.
Keep the torch beyond reach of children. 6.
Fill the microtorch only with butane gas. 7.
Protect the microtorch against oil, acids and other 8.
chemical agents.
When operating the microtorch always use personal 9.
protection measures: protective glasses and gloves.
Do not use the microtorch continuously for more 10.
than 20 minutes.
Do not use damaged microtorch. 11.
Do not repair the microtorch by yourself, do not 12.
dismantle parts of the microtorch.
Use the microtorch accordingly to the manual. 13.
CAUTION !
GB
CAUTION !
All checks and repairs should be carried out by the
by the supplier. Make all checks and repairs only after
the microtorch is gas emptied.
CAUTION !
It is recommended to carry out few soldering tests on
waste pieces of soldered material. Soldering skills come
with practice.
INTENDED USE
hand, which allows to operate in places without other
energy sources and for tasks that require higher heating
temperature.
TECHNICAL PARAMETERS
Approx. 1300°C
Approx. 15 minutes
Gas container capacity 12 ml
Gas type Butane
Weight 40 g
TOOL PARTS (Fig. 1)
Nozzle a.
Gas valve wheel b.
c.
OPERATION AND USE
is on top.
Use required adaptor and press the gas cylinder valve tip
emptied.
Switching on the microtorch (Fig. 3)
Turn the gas valve wheel of the microtorch
characteristic hissing of the gas coming out).
Direct the microtorch nozzle forward.
Light up gas coming out of the microtorch nozzle.