65
OPTIONAL ACCESSORIES
How to install the AUTO FLUO Ba filter
1
Turn the
OFF (
) and unplug the power cord.
2
Remove the barrier filter cover screw. Then, remove the barrier filter cover.
3
Turn the turret by fingers. Hold the filter frame showing "F" with your fingers or radio pliers
and pull it out straight.
4
Hold the frame of the AUTO FLUO Ba filter (optional accessory) with your fingers or radio
pliers and put it into the turret.
It is not necessary to distinguish between the front and rear of the filter.
Set the filter frame to the innermost correctly. Turn the turret with your fingers to make
sure that it is not caught by anything.
Be careful not to damage or stain the filter with fingerprint.
Be careful not to touch the wires.
5
Set the barrier filter cover in the reversed procedure of the removal.
Check after installing the AUTO FLUO filter attachment
1
Plug in the power cord and turn the
ON ( ).
2
Set the
to "F1".
3
Make sure that the yellow illumination light is emitted from the objective lens.
4
Press the
to make sure that the background which is seen through
the optical finder is dark.
POWER SWITCH
POWER SWITCH
FILTER SWITCHING KNOB
Ba (BARRIER) SWITCH
Содержание TRC-50DX
Страница 1: ...INSTRUCTION MANUAL RETINAL CAMERA TRC 50DX TRC 50DX ...
Страница 2: ......
