Topcon TRC-50DX, Инструкция по эксплуатации

Страница: 23 / 82

21
SETUP
CONNECTING THE EXTERNAL DEVICE
Consult your dealer for connection with external devices.
Use the external device complying with IEC 60950.
Connecting to IMAGEnet
This instrument can be connected to IMAGEnet (optional accessory) by two methods.
Connecting method 1: when using the USB terminal
1
Connect one end of the USB cable (optional accessory) to the USB terminal. Connect
another end of the USB cable to IMAGEnet. Send the data (right/left eye detection indica-
tion, angle of coverage indication, etc.) of the instrument from the USB terminal and
receive the data (timer, flash level, etc.) of IMAGEnet.
2
Connect one end of the connecting cord (optional accessory) to the CONTROL terminal.
Connect another end to IMAGEnet. Performs synchronization.
Connecting method 2: when using the DATA terminal
1
Connect one end of the connecting cord (optional accessory) to the DATA terminal. Con-
nect another end of the connecting cord to IMAGEnet. Send the data (right/left eye detec-
tion indication, angle of coverage indication, etc.) of the instrument from the DATA
terminal.
2
Connect one end of the connecting cord (optional accessory) to the CONTROL terminal.
Connect another end to IMAGEnet. Performs synchronization.
In the U.S. and Canada, use PC which complies with UL60950 or IEC60950.
Connecting to the video timer
1
Connect the timer cable (optional accessory) to the TIMER terminal.
2
Connect the timer cable (optional accessory) to the input terminal of the video timer
(optional accessory).
3
Connect the video signal cable to the input terminal of the external monitor.
Consult your dealer for the details.
In the U.S. and Canada, use video timer or monitor which complies with UL60950 or
IEC60950.
DATA
CONTROL
TIMER
USB terminal
DATA terminal CONTROL terminal TIMER terminal