Topcon Synergy GM-50 series, Инструкция по эксплуатации

Страница: 57 / 220

5-2
5 COORDINATE MEASUREMENT
5.2 Setting Height of the Instrument
It is possible to retain the height of instrument after turning the power off.

Refer to Chapter 17 “SELECTING MODE”.
5.3 Setting Height of Target (Prism Height)
This mode can be used to obtain Z coordinate values. It is possible to retain the height of target after
turning the power off.

Refer to Chapter 17 “SELECTING MODE”.
Operating procedure Operation Display
1
Press the {F4} (
↓
) key from the coordinate
measurement mode to get the function on page 2.
{F4}
2
Press the {F2} (INSHT) key.
The current value is displayed.
{F2}
3
Enter the instrument height. *1)
Enter Inst.HT
{F4}
*1)

Refer to Section 2.4 “How to Enter Alphanumeric Characters”.
 Input range –999.9999 Instrument height 999.9999 m
–999.999 Instrument height 999.999 ft.
–999.11.7 Instrument height 999.11.7 ft.+inch
Operating procedure Operation Display
1
Press the {F4} (
↓
) key from the coordinate
measurement mode to get the function on page 2.
{F4}
2
Press the {F1} (R.HT) key.
The current value is displayed.
{F1}
3
Enter the prism height. *1)
Enter R. HT
{F4}
*1)

Refer to Section 2.4 “How to Enter Alphanumeric Characters”.
 Input range –999.9999 Prism height 999.9999 m
–999.999 Prism height 999.999 ft.
–999.11.7 Prism height 999.11.7 ft.+inch
N: 123.456 m
E: 34.567 m
Z: 78.912 m
MEAS MODE NP/P P1
↓
R.HT INSHT OCC P2
↓
INSTRUMENT HEIGHT
INPUT
INS.HT=0.000 m
--- --- [CLR] [ENT]
N: 123.456 m
E: 34.567 m
Z: 78.912 m
MEAS MODE NP/P P1
↓
< <
< <
< <
N: 123.456 m
E: 34.567 m
Z: 78.912 m
MEAS MODE NP/P P1
↓
R.HT INSHT OCC P2 ↓
REFLECTOR HEIGHT
INPUT
R.HT =0.000 m
--- --- [CLR] [ENT]
N: 123.456 m
E: 34.567 m
Z: 78.912 m
MEAS MODE NP/P P1
↓
< <
< <
< <