2-2
2 PREPARATION FOR MEASUREMENT
•
Avoid using any sharp implement like a needle. Malfunction of the instrument could result.
•
Pressing down the Reset button may result in file and folder data being lost.
2.2 Battery Power Remaining Display
Battery power remaining display indicates the power condition.
•
The battery operating time will vary depending on the environmental conditions such as ambient
temperature, charging time, the number of times of charging and discharging etc. It is
recommended for safety to charge the battery beforehand or to prepare spare full charged
batteries.
•
For general usage of the battery, see Chapter 14 “POWER SOURCE AND CHARGING”.
•
The battery power remaining display shows the power level regarding to the measurement mode
now operating.
The safety condition indicated by the battery power remaining display in the angle measurement
mode does not necessarily assure the battery's ability to be used in the distance measurement
mode.
It may happen that the mode change from the angle mode to the distance mode will stop the
operation because of insufficient battery power for the distance mode which consumes more power
than angle mode.
Reset button
Battery power remaining display
Measurement is possible.
The power is poor. The battery
should be recharged or replaced.
Measurement is impossible. Need
to recharge or replace the battery.
Blinking
Other displays disappear.
V : 90°10'20"
HR: 0°00'00"
0SET HOLD HSET P1
↓
Blinking
