19-11
19 TOP FIELD MODE
Using an existing horizontal angle and saving the coordinate data of the collimate point
Setting by entering backsight directly
Operating procedure
Operation
Display
After the occupied point setting is completed,
this menu will be displayed.
1
Select
{F2}
(CREATE BS PT).
{F2}
2
Select
{F2}
(MEAS PT).
{F2}
3
Enter the coordinate point of a collimate point and
its description to record.
Enter PT #,
Enter
DESC
4
Set with
{ENT}
key.
{ENT}
5
Enter a reflector height.
Enter
reflector
height
6
Set with
{ENT}
key.
{ENT}
7
Collimate the reflector and press
{F1}
(MSR) key
to begin measurement.
{F1}
8
After measuring the reflector, record the
coordinate data to complete the setting.
Operating procedure
Operation
Display
After the occupied point setting is completed,
this menu will be displayed.
1.SELECT BS PT
2.CREATE BS PT
3.BS DIRECTION
[1] [2] [3]
1.INPUT PT
2.MEAS PT
[1] [2]
ENTER NEW POINT:
PT#: [_ ]
DESC: [ ]
ALP CLR
ENTER NEW POINT:
PT#: [BS ]
DESC: [POINT_ ]
ALP CLR
ENTER BS HEIGHT
BS HT
=0.000_ m
CLR
ENTER BS HEIGHT
BS HT
=1.500_ m
CLR
SIGHT BS TARGET
HD: m
MSR
SIGHT BS TARGET
HD* <<< m
>Measuring...
1.INST SETUP
2.LAYOUT
3.TOPO
[1] [2] [3]
1.SELECT BS PT
2.CREATE BS PT
3.BS DIRECTION
[1] [2] [3]
