Topcon SR-NIR, Инструкция по эксплуатации

Страница: 15 / 86

3
Power switch This is the power switch of this instrument.
DC input connector Insert the output plug of the AC adapter, which is the accessory of this
instrument, into this connector.
Viewfinder shutter selector
knob
Set this knob at the “CLOSE” position to block the light entering
through the viewfinder. When the measurement target is extremely
dark or when there is a luminous body on the viewfinder side, set the
viewfinder shutter to “CLOSE” in order to prevent the stray light from
the viewfinder.
Liquid crystal (LC) display
unit
This LC display unit is equipped with illumination and indicates a
variety of information such as the measured values, measurement
conditions or others.
Panel switches The switches are used to start/stop measurement and perform other
operations and to perform a variety of settings with the function mode.
Tripod mounting screw The screw is used to mount the instrument on a tripod. The 1/4-UNC
camera mounting screw is adopted.
Tool screw The screw is used to mount the instrument on systems or others.
The size is M4×0.7 (diameter: 4mm, pitch: 0.7mm).
☞
“External Dimensional Diagram” of “6.Appendices
Remember
When using the tripod mounting screw hole and the jig mounting screw hole,
use the specified screw. Do not tighten the screw excessively. The inside of
the instrument may be broken.
Liquid crystal
(LC) display unit
Viewfinder shutter
selector knob
Power switch
Panel switches
DC input
connector
Tripod mounting
screw
Tool screw: 3 pcs.
M4×0.7 (Depth 6)