Topcon SR-NIR, Инструкция по эксплуатации

Страница: 7 / 86

Disclaimer
•
We are not responsible for the damages caused by various problems such as, fire, earthquake,
behaviors by other persons, other accidents, intentional or negligent or wrong use of the device by
the operator, and the use of the device under abnormal conditions.
•
We are not responsible for incidental damages arising from the use or unavailability of the device
(loss of business income, business interruption, etc.).
•
We are not responsible for the damages caused by the uses other than specified in the Instruction
Manual.
•
We are not responsible for the damages caused by the malfunction due to the combination with
the connecting devices.
Precautions for Use
•
Use the AC adapter, which is the standard or optional accessory. Any other AC adapter except
the specified one may cause malfunction. For the power supply used for this instrument, the
input voltage is AC100V to 240V and the frequency is 50Hz to 60Hz.
•
For energy saving, when this instrument will not be used for an extended period of time,
disconnect the power plug from the outlet.
•
Keep this instrument away from water and liquid. It is not water-resistant.
•
Never measure the light source exceeding the measurable range or the sunlight. Such behaviors
may damage the photo detector and make it impossible to perform the stabilized measurement.
•
When using this instrument, do not turn ON the power right after turning it OFF. Because the
instrument inside is hot, the protective circuit works to indicate an error. In such a case, turn off
the power and leave the instrument as it is for about 30 minutes under the usable condition (5 to
35°C). Then, turn on the power.
☞
“5.1 Error Display of Instrument”.
•
Never use this instrument in the place which is dusty or humid or generates corrosive gas.
•
Never use this instrument where the temperature tends to vary rapidly. Although a temperature
compensating circuit is built in this instrument, it may not perform the stabilized measurement
under the environment where the temperature tends to vary rapidly.
•
Never use or store this instrument in a place which is subject to heavy shock like falling or tends to
vibrate at any time. Using or storing in such a place may damage the instrument equipped with
delicate optical components. To carry this instrument, please put it in the accessory carrying
case to prevent it from direct vibration or shock.
•
To store this instrument, be sure to put it in the exclusive carrying case and keep it under constant
temperature and humidity. Never store the instrument under high temperature and high humidity
condition (for example, in a car).
•
To maintain the measurement precision, be sure to perform the calibration at least once a year.
For the calibration, consult the local retailer from which you purchased the instrument or TOPCON
TECHNOHOUSE CORPORATION.
•
When the calibration is performed, the measurement data stored in this instrument are completely
erased. Be sure to back up the necessary data in your personal computer, etc. before requesting
the calibration.
•
Never peel off the seal from the rear surface of this instrument. If it is peeled off, all of warranty
will be invalid.