Topcon SR-NIR, Инструкция по эксплуатации

Страница: 70 / 86

58
4.1.7 DR [n] Command
Perform local measurement and read the measurement data stored in the instrument to write it in PC.
Specify 1 to 50 for “n”.
☞
“1.3.2 Connecting PC”.
☞
“4.2.2 Output Format for Reading Internal Stored Data”.
4.1.8 KO1/KN1 Command
Change the setting for using the correction factor in the instrument.
KO1 : Change the setting to use the spectrum correction factor in the instrument.
KN1 : Change the setting not to use the spectrum correction factor in the instrument.
KO1/KN1+(Cr
･
Lf)
“OK”+(Cr ･
Lf)
PC Command/Communication direction SR-NIR
PC Command/Communication direction
SR-NIR
“DRn”+(Cr
･
Lf)
“
OK”+(Cr
･
Lf)
• • • • •
• • • • •
Data (Cr·Lf)
“600”+(Cr
･
Lf)
“1030…”+(Cr
･
Lf)
“END”+(Cr
･
Lf)