Topcon SR-NIR, Инструкция по эксплуатации

Страница: 37 / 86

25
(5) MAINTAIN: This is relevant to maintenance.
○
1
Maintenance Display : Set whether the maintenance recommendation should be
displayed or not.
☞
“3.14 Maintenance Recommendation Display”.
○
2
Memory All Clear : Batch deletion of measurement data/DIF standard data
☞
“3.16 Batch Deletion of Measurement Data/DIF
Standard Data
”.
Note
• Each time you press the [ENTER] switch, the displayed items are changed. Press the
[ENTER] switch until a desired item is displayed.
• In the function mode, the switch functions are changed to the names being displayed
under the switches. Hereinafter, the function mode will be explained with the names
under the switches.
■
How to cancel the function mode
After you have finished setting the items, press the [FUNCTION] switch. The function mode menu
initial screen appears again. While this screen is being indicated, press the [FUNCTION] switch
again. The function mode is finished and the measurement result screen appears on the LC display
unit. The setting of measurement mode will be explained as an example.
☞
“3.2 Measurement Mode”.
Example: Setting of measurement mode
(1)
Change the measurement mode to “AUTO”. Setting is finished.
(2) Press the [FUNCTION] switch, and the function mode menu screen appears again as shown
below.
(3) Press the [FUNCTION] switch again. The function mode is finished and the measurement
result screen appears as shown below.
Function mode menu screen
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE ROTATION
SHIFT
FUNCTION
＊ MEASURE MAINTAIN
FACTOR
COMM ．
DISPLAY
* Ｍｅａｓｕｒｅ Ｔｙｐｅ *
＊ＡＵＴＯ
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE ROTATION
SHIFT
FUNCTION
＃１０ ＡＵＴＯ ＡＢＳ ２．０
１．０
６００ｎｍ ＝ １．４４６８Ｅ＋０２
１０３０ｎｍ ＝ ２．４４６６Ｅ＋０２