Topcon SR-NIR, Инструкция по эксплуатации

Страница: 61 / 86

49
3.16 Batch Deletion of Measurement
Data/DIF Standard Data
Delete all of measurement data and all of DIF standard data at a time.
The procedures are described below.
1. Shift to the function mode. Access [MAINTAIN] from the function menu. Then, access the
[Memory AllClear] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2. To delete all of measurement data at a time, press the [CHANGE] switch. To delete all of
DIF standard data at a time, press the [ROTATION] switch.
The batch deletion screen appears.
This is the batch deletion screen for measurement data. The batch deletion screen for DIF
standard data is similar to this.
3. Press the [SHIFT] switch.
All the measurement data are deleted and the preceding screen appears again.
Remember
When you do not want to perform batch deletion, do not press the [SHIFT]
switch but press the [CHANGE] switch. The data deleted by the batch
deletion function cannot be restored. Be careful.
＊Ｍｅａｓ Ｄａｔａ ＡｌｌＣｌｅａｒ＊
ＳＨＩＦＴ ： ＯＫ
ＣＨＡＮＧＥ ： ＮＯ
＊ Ｍｅｍｏｒｙ ＡｌｌＣｌｅａｒ ＊
ＣＨＡＮＧＥ ：Ｍｅａｓ Ｄａｔａ
ＲＯＴＡＴＩＯＮ：Ｓｔｄ Ｓａｍｐｌｅ