Topcon GREEN LABEL GTS-250 Series, Инструкция по эксплуатации

Страница: 73 / 176

6-28
6 SPECIAL MODE (Menu Mode)
 Input POINT data
Operating procedure Operation Display
1
To input POINT data, press the [F4] key.
[F4]
2
Input N coord.
3
Press the [ENT] key.
4
Input E coord.
5
Press the [ENT] key.
6
Input RADIUS. *1)
7
Press the [ENT] key.
8
Input parameter A1. *1)
9
Press the [ENT] key.
10
Input parameter A2. *1)
11
Press the [ENT] key.
Input
N coord
[ENT]
Input
E coord
[ENT]
Input
RADIUS
[ENT]
Input
parameter
A1
[ENT]
Input
parameter
A2
[ENT]
*1) If the data input is not required, press the [SKIP] key.
 When inputting POINT data, if the next data is not POINT data, ROAD is calculated as a straight line
irrespective of the values for RADIUS, A1 and A2.
F1:LINE
F2:CURVE
F3:SPIRAL
F4:POINT
POINT 04
N = 0.000 m
E : 0.000 m
––– ––– [CLR][ENT]
POINT 04
N : 100.000 m
E = 0.000 m
––– ––– [CLR][ENT]
R > 0.000 m
A1: 0.000
A2: 0.000
INPUT ––– SKIP ENTER
R : 100.000 m
A1> 0.000
A2: 0.000
INPUT ––– SKIP ENTER
R : 100.000 m
A1: 80.000
A2> 0.000
INPUT ––– SKIP ENTER
<SET!>