Topcnc SD300, Инструкция пользователя

Страница: 2 / 104

Safety Precautions
Before storing, installing, wiring, operating, inspecting, or repairing the
product, the user must be familiar with and adhere to the following important
items to ensure safe use of the product.
Incorrect handling can cause danger and result in personal injury or death.
Incorrect handling can be dangerous, resulting in personal injury and possible
damage to the equipment.
Strictly prohibited behavior, otherwise it will cause equipment damage or can
not be used.
1.
Use occasion
2.
Wiring

Do not expose the product to moisture, corrosive gases or flammable
gases.Doing so may result in electric shock or fire.
 It is forbidden to use the product in places with direct sunlight, dust,
salt and metal powder.

It is forbidden to use the product in places where water, oil and drugs

Ground the grounding terminal reliably. Poor grounding may result in
electric shock or fire.

Do not connect the 220v drive power supply to the 380v power supply.
Otherwise, it may cause equipment damage and electric shock or fire.

Do not connect the u, v, w motor output terminals to the three-phase
power supply, as this may result in personal injury or fire.

The u, v, and w motor output terminals must be connected to the motor
terminals u, v, and w one by one. Otherwise, the motor may overspeed and
 Please tighten the power supply and motor output terminals, otherwise it
may cause a fire.