Top Air TA1200, Руководство оператора и список запасных частей

Страница: 22 / 102

2-10
Operation
FILLING SPRAYER
Spray chemicals can be added to the
solution tank by either pouring directly
into the top tank access hatch, or
through the use of an optional inductor
(described elsewhere in this section).
Before adding chemicals, ensure that the
tank contains at least 50 gallons of water.
WARNING: Always wear personal
protective equipment when working
with or near chemicals. This
equipment includes, but is not limited
to: protective eyewear, gloves, shoes,
socks, long-sleeved shirt and long
pants. Additional protection may be
required for many types of chemicals.
The solution tank is equipped with dual
mixing eductors for agitation, which use
a fraction of the pump output to keep
chemicals in solution. Always allow
enough time for complete mixing of the
tank contents before starting any
spraying operation.
Guidelines for an initial flow setting of
the agitation system are given under the
“Basic Sprayer Settings” heading in the
SPRAYER OPERATION section. It is
important to note that the amount of
agitation may need to be adjusted
during the spraying operation in order to
minimize foaming of certain chemicals.
1. Ensure that QUICK-FILL
SELECTOR valve is <OFF> .
2. Connect fill hose to quick-fill coupler.
3. Turn valve to <RINSE> to fill rinse
tank, and <SOLUTION> to fill
solution tank.
CAUTION: Never leave sprayer
unattended while filling. Tank contents
may spill out of air vents if overfilled.
NOTE: The solution tank is designed
with additional air expansion space in
excess of the rated capacity. The full
capacity can be reached with the level
approximately 6"- 8" below the top
surface of the tank access hatch (lid
opened).
4. Return valve to <OFF> when filling is
complete.
401966
•
Tank Mixing
•
Quick Fill