Tonghui Electronics TH9110, Руководство по эксплуатации

Страница: 80 / 84

◇
80
Return value: load pas return OK, load fail return ERROR
USB:DEL DELETE current settings to external storage file name.
-- Syntax:
Command message: USB:DEL <file name>
-- Data<file name>:
Data format: characters
-- Example:
Set the delete file name to TH9110TEST.
Command message: USB:DEL TH9110TEST
Return value: delete pass return OK, delete fail return ERROR
USB:COPY COPY current settings to external storage file name
-- Syntax:
Command message: USB:COPY <file name>
-- Data<file name>:
Data format: characters
-- Example:
Set the delete file name to TH9110TEST.
Command message: USB:COPY TH9110TEST
Return value: copy pass return OK, copy fail return ERROR
5.2.7 FETCH Subsystem Commands
The FETCh subsystem command is used to obtain the measurement results of the tester and is
issued after the test is started until the end of the test or interrupted by other commands.
FETCh To get the measurement result.
-- Syntax:
Command message:
FETCh: AUTO <ON/OFF> or <1/0>
Query message:
FETCh:AUTO?
-- Data<ON/OFF> or <1/0>
Data format: character
Data range: 0 (OFF), 1 (ON)
-- Example:
Set auto returned test result to ON.
Command message: FETCh:AUTO ON
Query message: FETCh:AUTO?
Return value: ON
FETCh? Output the test result.
Command Syntax: FETCh? After the tester receives this command, the tester will automatically issue
the test results for all steps until the end of the test.
Return Format: test steps: test mode, actual test voltage (kV) ,actual test current (A), test result;