Tomey UD-600, Руководство оператора

Страница: 217 / 262

6-3
6. Troubleshooting
z z z z z
The brightness and color tone of the printout from the video printer
are noticeably different from those on screen.
Cause 1
Setup value of the video printer is not as prescribed.
Remedy
Adjust the contrast, brightness and color
tone, in accordance with the Operating In-
structions for the Video Printer.
Cause 2
The setting of UD-6000 Video Printer color mono-
chrome select switch is not proper.
Remedy
In case the monochrome video printer is con-
nected to the instrument, turn the video
printer color/monochrome select switch to
the side of "M", while in case the color video
printer is connected to the instrument, turn
the select switch to the side of "C".
z z z z z
Screen differs from the printout from the Video Printer.
Cause 1
The setting of the Printer is not correct.
Remedy
In case of using the Video Printer having the
memory function, previously stored data
other than the image being displayed may be
printed out•Aif only by pressing the Print
button of this instrument. Set the printing
mode in such a manner that data being dis-
played is printed only by the remote opera-
tion, in accordance with the Operating
Manual of the Video Printer.
z z
z z z No printout can be made by built-in Printer.
Cause 1
Printer paper
Remedy
Check if the printer paper is left for printing
and if it is loaded properly, in accordance with
the procedures prescribed in "5.4 Replac-
ing of the built-in printer paper".
Cause 2
Printing is made by B-scan image diagnosis func-
tion/Assistant function of biometry/A-scan diagno-
sis function.
Remedy
Printing from the built-in printer can only be
made by axial length measuring function.