Tomey UD-600, Руководство оператора

Страница: 62 / 262

3-34
<Movement of the Vector-A waveform>
$
&KCI
+&0Q 5GZ/CNG /C[
8GEVQT#
*QTK\QPVCN
2CVKGPV61/'; 2J[UKEKCP;#/#&#
2#)'8OU
6)F$UVGRU
%6F$UVGRU
0)F$
()F$
(TCOG4CVG*KIJ
(QEWU4GIKQP/KFFNG
5EQRG0QTOCN (TCOG4CVG*KIJ
(QEWU4GIKQP/KFFNG
5EQRG0QTOCN
R
1 &
1&
1) Press the Vector-A MOVE key D (Fig. 1) to change the
display to the Vector-A positioning mode. (Fig. 3)
2) Next press the UP/DOWN key E to move the cursor line
(yellow) up and down, so that the A-scan waveform (pale
blue) in the cursor line is displayed at real time. If the UP/
DOWN key is continuously pressed, the cursor line moves
continually, while if it is pressed for short time, the cursor
line moves by gradation.
3) When touching the image, the cursor line position will be
moved to the position where the cursor position is touched.
4) Press the Horizontal key
F
to move the cursor line to the
center (default) position.
5) When pressing the Vector-A key G , the display will be re-
turned to its former mode with the cursor line and the A-
scan waveform as being displayed. (Fig. 2) However, the
zooming (See (g) in this section.) cannot be set with the a-
scan waveform as being displayed. If, also the area calcu-
lation function ((f) in this section) and the Quad image dis-
play ((L) in this section) are set, the display for cursor line
and A-scan waveform will not be displayed, but displayed
if these functions are released.
(Fig. 3)
G
E
H
3.3 B-scan diagnosis