Tomey UD-600, Руководство оператора

Страница: 16 / 262

1-2
- Be sure to connect the power plug to the outlet with a ground cable for
three-prong plug. In case of leakage due to failure, an electric shock
may result.
- Do not put any heavy stuff on or pinch the power cable, or a fire may
result.
- Be sure to connect the power plug all the way in. When the connection
gets loose, the metal touches or dust gathers in the terminal of an
exposed plug, a fire or an electric shock may result.
- Do not connect any other devices which have different data
communication standard. A fire or an electric shock may result.
Contact the purchasing place when connecting a device to the
communication connectors.
- Connect the grounding correctly, or an electric shock may result.
- Do not set up in a place where it gets direct sunlight, the place with
high temperature and humidity or the place where the negative effect
may occur by air containing dust, salinity, sulfer, etc.
- Set up in a stable place without inclination, vibration, impact, or test
result may not be accurate. Also a fire or an accident resulting injury
or death may result from falling or dropping.
- Set up in a place far enough from other equipments to avoid
malfunction.
„ „
„ „
„
Note the followings before use.
- Confirm that this instrument works properly by checking the
connection and polarity of switches, dial settings, meters etc.
- Check if all the cables are connected correctly and completely.
- Be careful when using this instrument by other devices working near
it. It could caused a danger.
- Confirm that the ground cable is connected properly.
- Confirm that the date indicated by the instrument is correct.
„ „
„ „ „ Note the followings during use.
- Do not put a bottle with liquid etc. on the instrument. An electric shock
or a failure may result.
- Do not lean against the instrument or put any pressure on it. It may fall
leading to failure or injury.
- Do not spend too much time for diagnosis ord measurement.
- Always check if there is any abnormality in the instrument and the
patient.
- When any abnormality is found in the instrument or the patient,
discontinue testing immediately and take appropriate measures.
1.1 Operating precautions