HC-1500AT
23
15. About Error Message
Error message
Error message is displayed when there is an internal failure.
Tracking Error
Condition
When there is no response from the linear
when operating under THP interface mode.
Operation
Operation not feasible thereafter.
TRACKING ERROR!!
Pouwer on linear
Blinks Blinks
To reset
Turn power of linear on.
FUNCTION
Off-set Error
Condition
Off-set of internal sensor circuit has been shifted.
Operation
Operation not feasible thereafter.
OFFSET ERROR!!
PH=xxx MAG=yyy
Blinks Blinks
To reset
Contact the service center.
FUNCTION
Pre-set Error
Condition
Capacitors (C1, C2) did not shift to proper
positions within five seconds.
PRESET ERROR!!
Push FUNC _restat
Blinks Blinks
FUNCTION
Operation
With linear combination off, system becomes
barefoot mode.
To Reset
Press FUNCTION button.
If the memory is the cause of the failure, tuner
must be reset to factory defaults.
If after reset the same error is displayed, motor
components may be the cause. Refer unit to the
Service Center.
Reset
