HC-1500AT
6
< REAR PANEL >
ANT 3
ANT 2
ANT 1
CONT
YAESU
KENWOOD
I N
TRX
OUT
CIV
STBY
I N
OUT
I N
OUT
DC12V
USB
1
2
3
4
5
6
7
8
9
10
12
11
13
14
15
(1) ANT3 Antenna Connector 3 (SO-239)
To be selected by Select rotary dial and
Entry button.
(2) ANT2 Antenna Connector 2 (SO-239)
To be selected by Select dial and Entry.
(3) ANT1 Antenna Connector 1 (SO-239)
Tuner network is usually connected to this
connector, if not selected in particular.
(4) TRX IN Connecter (SO-239)
Connect a coax cable from ANT (antenna)
connector of the linear amplifier.
(5) GND
Ground terminal.
(6) USB
Serial interface USB socket for the future
firmware version up-grade.
(7) STBY-OUT
RCA jack to connect PTT cable to SEND
(or STBY, REMOTE) socket of the linear amp.
(8) STBY-IN
RCA jack to connect PTT cable form SEND
(or TX GND, REMOTE, RELAY etc.) socket
of transceiver.
(9) CIV-OUT
Output socket for ICOM radio’s CI-V interface.
(10) CIV-IN
Input socket for ICOM radio’s CI-V interface.
(11) KENWOOD-OUT
Output connector socket for KENWOOD
radio’s control interface.
(12) KENWOOD-IN
Input connector for KENWOOD radio’s
control interface.
(13) YAESU
Socket for YAESU radio ‘s band data cable.
(14) CONT (THP Interface)
Socket for interface cable of Tokyo Hy-
Power’s original tuner connection specs.
Compatible with HL-1.5KFX, HL-2.5KFX and
HL-2500FX.
