HC-1500AT
17
FUSE
FUSE
ANT B
ANT A
INPUT
ALC ADJ
ALC
SEND
TUNER
SELECT
AC IN
FUSE
FUSE
REMOTE
DC OUT
12V1A
CONT
SERIAL
USB
GND
AC IN
ANT 3
ANT 2
ANT 1
CONT
YAESU
KENWOOD
I N
TRX
OUT
CIV
STBY
I N
OUT
I N
OUT
DC12V
HC-1500AT
AC IN
HL-2500FX
To Antenna
Connection
For YAESU x-ceiver and using a THP HL-2500, HL-2.5KFX, or HL-1,5KFX amplifier, it is recommended to
connect the x-ceiver and linear with a YAESU band cable. Also connect the cable between the amplifier and
HC-1500AT using the Tokyo Hy-Power tuner interface cable.
Setting Sequence
14MHz FUNC NON
C1=12 C2=19 ANT1
(1) Set the Band (for 1.8 and 35MHz)
14MHz FUNC NON
C1=12 C2=19 ANT1
14MHz WAIT NON
C1=12 C2=19 ANT1
14MHz STBY NON
C1=51 C2=55 ANT1
14MHz TUNE NON
C1=51 C2=55 ANT1
14MHz RADY NON
C1=53 C2=45 ANT1
Set the band with
FUNCTION button
and SELECT dial.
Setting of HC-1500AT
Setting of Linear
YAESU mode
Setting of Transceiver
None
Interface = YAE
1.822 STBY FRQ
C1=12 C2=19 ANT1
Note
For 1.8 and 3.5MHz band only, please set the
band minutely when the radio is YAESU.
Bands are divided into several segments as follows.
Manually select the nearest channel to your actual
operating frequency.
1.8MHz
1.80Mz·1.82Mz·1.85Mz·1.87Mz·1.90Mz·1.92Mz·1.9
5Mz·1.97Mz
3.5MHz
3.5MHz·3.6MHz·3.7MHz·3.8MHz·3.84Mz·3.94Mz
BAND DATA
TX-GND
ALC
ANT
To YAESU X-ceiver
RCA Plug Cable
YAESU Band Cable
RCA Plug Cable
Coax Cable
HC-1500AT DC Power Cord
11-4. Setting / Tokyo Hy-Power Interface
(2) Antenna Select
(3) Return to STBY mode
(4) Transmit the carrier and imitate the tuning.
(5) Tuning will be finish in a few seconds.
(6) Return to receive state once, and the linear is no longer
bypassed.
Antenna should be
selected for each
band.
“WAIT” may take
approx. 3 seconds.
It may take approx. 3
seconds before
tuning is completed.
Linear is still
bypassed at this
stage.
THP tuner cable