HC-1500AT
27
18-1 Maintenance / All Reset
FACTORY RESET
READY
WARNING
SWR
1.5
2.0
HF AUTOMATIC ANTENNA TUNER
HC-1500AT
SELECT
ENTRY
FUNCTION
POWER
OFF
While pressing FUNCTION, turn POWER on.
ALL MEMORY RESET
PUSH ENTRY
En
F
ALL MEMORY RESET
DONE!!!
En
F
If nothing,
done.
Press ENTRY.
All reset finished.
En
F
1.82Mz STBY KEN
C1=12 C2=19 ANT1
STBY mode
(To wait for tuning command)
All tuning data are stored in the IC memory. However, for some reason, there is a chance that data
became corrupted. In such a case, memory can be re-written to default condition at time of factory
shipment. This is called “All Reset” and operation procedure is as follows.
(1)
At first, turn the power off.
(2)
While pressing FUNCTION button,
turn power on again.
(3)
Reset appears in display.
(4)
If ENTRY button is pressed, within
five seconds, factory reset will initiate.
(5)
If no action is made within five seconds,
LCD will change to STBY mode (to wait
for operation command).
Steps
Remarks
When all reset is made,
(factory reset)
Antenna:
ANT 1 for every band.
Interface:
NON
Pre-set Data:
For 50
Ω
load,
per each band.
