HC-1500AT
8
7-1. Special Notes
B. Antenna Setting
Any antenna port can be programmed for a particular band.
Once programmed, the data remains in memory until it is re-programmed.
C. Band Data
As a means of band data transfer, following interfaces are available for HC-1500AT.
·CIV: ICOM’s CI-V interface. As 1 KHz order data is carried, band data is transferred
instantaneously making quick QSY’s possible
·KEN: KENWOOD’s interface of EIA-232C serial. Also handles detailed data.
·YAE: YAESU’s 4 bit band data. Since only the band data is carried it needs a supplementary
freq. data for low bands.
·THP: The mode to connect to TUNER terminal of THP linear amps. (PWM hand-shake.)
·FRQ: Frequency measuring mode through the built-in frequency counter. Needs one push of
button to start up.
·NON: NON interface. Completely manual setting mode.
A. For Amateur Service
HC-1500 is strictly for amateur radio use only.
Operation outside the amateur bands operation is not recommended and could
will cause the tuner to malfunction.
Please read following notes before you power up the tuner.
