Toku TMH-25TP2E/C2 Скачать руководство пользователя страница 9

Страница: 9 / 37

WARNING

;

Make sure the load is balanced.

・

When using a wire rope or a sling, make sure the load is

balanced before lifting. The load may fall and it is

dangerous.

WARNING

;

Do not lift/lower suddenly.

・

When suddenly lowering the load, this may lead to poor

balance of the load and the load may fall.

WARNING

; Do not use the hoist to lift

people.

・

The hoist is used to lift loads. Never lift people using the

hoist. This is very dangerous.

WARNING

;

Do not leave the job site.

・

Do not leave the job site when a load is in suspension.

Always lower the load and un-load the load before departing.

WARNING

;

Do not operate the hoist under

the load.

・

Make sure you are away from the load when operating the

hoist.

It is dangerous if the load falls.

WARNING

;

Do not touch the hoist, under hook area and chain during

operation of the hoist.

・

It is dangerous if your hand gets caught in these areas.

[email protected]

Air & Allied Sales (Pacific) Pty Ltd

www.air-allied.com.au

Содержание TMH-25TP2E/C2






































Результаты поиска

Содержание TMH-25TP2E/C2

Отзывы:

Похожие инструкции для TMH-25TP2E/C2

Бренды по названию

Популярные бренды

Toku TMH-25TP2E/C2, Инструкция по эксплуатации

Результаты поиска

Содержание TMH-25TP2E/C2

Отзывы:

Похожие инструкции для TMH-25TP2E/C2

Бренды по названию

Популярные бренды