Toku TMH-25TP2E/C2 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 37

Toku TMH-25TP2E/C2 Скачать руководство пользователя страница 8

7

WARNING

;

Check the slings and hook safety claw before using the hoist.

・

Make sure the sling is connected correctly before lifting. Also make sure the hook safety claw is

working correctly. If it is used in poor conditions, this may lead to removal of the sling and the load

may fall.

WARNING

;

Before using the hoist, make sure the chain is not twisted.

・

As shown in the diagram, make sure the chain is not twisted during usage of the hoist.

If the chain is twisted, this will lead to jamming and also possible breakage of the chain.

WARNING

;

Do not depress the pendant lever unnecessarily.

・

Make sure the conditions are correct before operating the hoist. Under poor conditions, the load

may fall onto the floor or the load may fall onto the operator. It is very dangerous.

・

Depressing the pendant lever will start

operation of the hoist and releasing will

stop the hoist.

・

Pulling the cord will start the hoist and

releasing the hoist will stop the hoist.

twist

Pendant lever

Cord

[email protected]

Air & Allied Sales (Pacific) Pty Ltd

www.air-allied.com.au

«
...
6
7
8
9
10
...
»

Содержание TMH-25TP2E/C2






































Отзывы:

Нет отзывов