TOHATSU MFS 15, Руководство пользователя

Страница: 56 / 322

INSPECTION AND MAINTENANCE
55
ENOM00080-0
Maintaining engine oil
If the engine oil is low, the life of the engine
will be shortened significantly.
ENOM00081-0
Checking oil level
1. Stop the engine and set it in a vertical
position.
2. Remove the top cowl.
3. Remove the dipstick.
4. Wipe oil off the oil dipstick with a clean
rag.
5. Put in the dipstick.
6. Take out the dipstick and check the oil
level.
7. Replace the dipstick.
1. Oil filler cap
2. Dipstick
1. Upper Level 1000 mL (33.8 fl.oz.)
2. Lower Level 750 mL (25.4 fl.oz.)
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears contam-
inated.
ENOM00082-0
Replenishing engine oil
If the oil level is low, or at lowest mark, add
recommended oil to the upper dipstick
mark.
ENOW00079-0

Do not add engine oil of brand and grade
other than existing one. In case engine
oil of other brand or grade is added,
drain all oil and ask dealer for treatment.

In case other than engine oil such as
gasoline is put in the oil chamber, empty
the chamber and ask dealer for treat-
ment.

When replenishing engine oil, be careful
not to allow entry of foreign matters
such as dust and water into oil chamber.

Wipe off engine oil well immediately if
spilled.

Do not replenish engine oil over upper
limit. If overfilled, remove oil to upper
limit. If engine oil is over the upper limit,
it can leak potentially leading to engine
damage.
ENOM00083-0
Washing outboard motor
If outboard motor is used in salt water,
brackish water or water with a high acidic
level, use fresh water to remove salt,
chemicals or mud from exterior and cool-
1
2
ENOF00331-0
2
1
ENOF00332-0
CAUTION