172-65702M-04 (SQ-C01) 10 Dec 2020
40
Disposal of the Unit
When disposing of the unit, disassemble and sort components in a way that adheres
to local regulations, while considering environmental conservation, recycling and the
pollution prevention.
Storage
The openings of the unit are sealed with a label, plastic sheet, etc., and delivered
after taking measures to prevent rust and contamination.
Observe the storage instructions until the unit is installed on the piping. If the
following storage instructions cannot be observed, rust or foreign matter may void
the warranty.
Storage Instructions
(1) Store the unit indoors to prevent it from getting wet by rainwater, dew, etc.
(2) Store the unit indoors with humidity less than 80%
(3) If the label or plastic sheet used for sealing or packaging of the unit is damaged,
replace it immediately or repair it with appropriate tape to maintain the seal.
(4) When repacking the unit, pack it with cushioning material so that it does not fall
or collide when moving or transporting.
(5) If the unit is stored for a long period of time (approx. six months or more), unpack
it at intervals of six months or less to check visually for rust and foreign matter. If
an antirust agent is used, replace it with a new one of the same amount.
After no abnormalities are confirmed, seal the opening as it was.
(6)
Remove labels, plastic sheets, etc. sealing the opening just before installing the
unit.
