FITTING INSTRUCTIONS
Product:
T13 Outback Frontal Protection System
Vehicle:
Mazda BT50
Part No.
070SB13L46E
For product warranty please refer to our website www.tjm.com.au
File: F-5002
Page 6 of 19
25/01/2021
10.
If OE fog-lights are installed, disconnect the
wiring harness from the fog-lights.
11.
Carefully remove the bumper from the vehicle.
The OE fog-lights & bumper are not
required for the installation of this FPS.
12.
Remove (& discard) the indicated plastic
components (& any associated fasteners) from
each headlight.
13.
Remove (& discard) the indicated plastic part
(& fasteners) from the front of the intrusion
beam.
LHS SHOWN
