FITTING INSTRUCTIONS
Product:
T13 Outback Frontal Protection System
Vehicle:
Mazda BT50
Part No.
070SB13L46E
For product warranty please refer to our website www.tjm.com.au
File: F-5002
Page 4 of 19
25/01/2021
1.
Remove (& retain) the number-plate,
discarding the fasteners.
2.
Remove (& retain) the clips (5) retaining the
top infill panel & the grille.
3.
Remove (& retain) the top infill panel from the
vehicle & carefully set it aside.
4.
Behind & along the bottom of the grille,
disengage the clips from the indicated
locations, then remove the grille from the
vehicle & carefully set it aside.
5.
Remove (& retain) the fasteners on the
bumper, near the headlights.