Titgemeyer TIOS ER15, Руководство по эксплуатации

Страница: 17 / 28

17
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 E-mail: fasteners@titgemeyer.com
L
Tb1524GB(1212)1
TIOS
®
ER15 Battery-Operated Blind Rivet Tool
Operating Instructions
Installing the blind rivet
What to remember!
Important
Important
Note
Damage to materials! Always hold the rivet tool at right angles (90°) to the area where you
want to install the blind rivet nuts. If held at another angle, the rivet will not install correctly.
Damage to materials! Only use the nose piece that matches the blind rivet you are going to
use! Using an incorrect nose piece can damage both the jaws and the nose piece.
For details on hole diameters and clamping areas, please refer to the specifications in the rivet
manufacturer's catalogue.
1. Insert the wire rivet mandrel into the nose piece.
2. Insert the blind rivet into the pre-drilled hole.
3. Press the rivet tool firmly against the component (pressure-sensitive control).
4. Press the trigger to initiate and maintain the installation stroke.
5. Release the trigger.
6. Tilt the rivet tool so the spent mandrel falls in to the container.