Titgemeyer TIOS ER15, Руководство по эксплуатации

Страница: 19 / 28

19
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 E-mail: fasteners@titgemeyer.com
L
Tb1524GB(1212)1
TIOS
®
ER15 Battery-Operated Blind Rivet Tool
Operating Instructions
Maintaining the rivet tool
Caution Risk of injury due to improper care! All maintenance, care and service work on rivet tools
must be conducted by suitably trained personnel. If the tool is used as intended, the operator
should be at no risk. The operator may only carry out the work described in these operating
instructions.
1
2
3
Pull the nose cap (14) forwards and remove.
Remove the battery before beginning any work on the rivet tool.
Loosen the lock nut (17) and remove by pulling it forwards.
Pull the catch (9) backwards.
Remove the jaw case, jaws, ram and spring.
Clean all the parts thoroughly using a cleaning rag or compressed air.
Reassemble following the above steps in reverse order.
Before reassembly, lightly grease the jaws with an acid-free oil.
Maintenance intervals
Interval
Daily before each use
Daily before each use
Daily before each use
Activity
Check for cracks
Check nose piece for rivet dia-
meter as well as wear and tear
Check the jaws and jaw case
How?
Visual inspection
Visual inspection
Function check
Who?
Operator
Operator
Operator
Remarks
Replace nose piece if necessary
Clean or replace jaws if
necessary
Cleaning the pulling unit