Titgemeyer TIOS ER15, Руководство по эксплуатации, Страница: 13 / 28

13
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 E-mail: fasteners@titgemeyer.com
L
Tb1524GB(1212)1
TIOS
®
ER15 Battery-Operated Blind Rivet Tool
Operating Instructions
Storing the rivet tool
Until used for the first time
Longer storage after use
Disposing of the
rivet tool
Maintaining and cleaning
the rivet tool
Caution
Important
If you do not need to use the rivet tool immediately, please store it in its original packaging in
a dry, dust-free place.
Clean the rivet tool (see “Maintaining and cleaning the rivet tool”).
Remove the battery whenever the rivet tool is not in use.
If you do not intend to use the battery for a lengthy period of time, fully charge the battery
and then store in a dry, dust-free place.
Store the rivet tool in a dry, splash-proof place.
Store the rivet tool in a well-ventilated room that is well-protected from heavy dust.
Ensure that no aggressive chemicals or vapours are present in the storage area.
Never store the electrical tool or battery in areas where temperatures exceed 50 °C.
Dispose of the rivet tool components in the proper manner. Neither the rivet tool nor its
individual parts should be mixed with household waste. They should be disposed of at a
special collection centre for electronic waste.
Do not dispose of the battery as solid waste. It should be taken to a battery recycling plant
or returned to the manufacturer for disposal.
Risk of injury due to improper care! All maintenance, care and service work on rivet tools
must be conducted by suitably trained personnel. If the tool is used as intended, the operator
should be at no risk. The operator may only carry out the work described in these operating
instructions.
Risk of injury due to falling rivet tool!
Danger of material damage due to corrosion!
Do not use any aggressive cleaning agents or flammable liquids to clean the tool!
Do not spray any cleaning agents, solvents or readily flammable substances into the vents
or openings in the housing.
The following tasks are recommended:
Clean the rivet tool and check for any mechanical faults.
If the rivet tool is to be stored for a longer period, first clean the tool and then lightly grease
all the exposed metal components (see “Maintenance intervals”).
Environ-
mentally
hazardous