Titgemeyer TIOS ER15, Руководство по эксплуатации, Страница: 7 / 28

7
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 E-mail: fasteners@titgemeyer.com
L
Tb1524GB(1212)1
TIOS
®
ER15 Battery-Operated Blind Rivet Tool
Operating Instructions
Safety notes
Intended use
Foreseeable misuse
Safety notes
The TIOS ® ER15 battery-operated blind rivet tool may only be used to install blind rivets, as
described in these operating instructions.
The TIOS
® ER15 rivet tool is designed to install standard and cap (sealed end) blind rivets, as
well as high-strength blind rivets with a rivet shank ø of 3.0 – 6.5 mm made from any material
up to a max. installation force of 15 kN.
This rivet tool may only be used as a manually operated tool!
The customer is solely responsible for any modifications made to the rivet tool.
The safety notes contained in these operating instructions must be strictly observed at all times.
Never throw or drop the rivet tool!
This tool has been made to the very latest engineering standards and in keeping with the
approved safety guidelines. It can be operated safely provided that the safety notes and intend-
ed use are observed and that the appropriate personal protective equipment is worn.
• Danger, electrical tool:
Only allow trained electricians to carry out work on the rivet tool. Check the electrical equip-
ment at regular intervals. Repair any loose connections and damaged leads immediately.
• Observe the corresponding accident prevention regulations that apply in your
country.
• Never point the tool at anyone while it is in use.
• Keep your work area clean, tidy and well-lit. Bad housekeeping and poorly-lit work
areas increase the likelihood of accidents.
• Never use electrical tools in explosion-prone areas where combustible liquids,
gases or dust particles are found. Electrical tools generate sparks which can ignite dust or
vapours.
• Take environmental conditions into account. Never expose electrical tools to rain.
Never use electrical tools in humid or moist environments.
• Only use the rivet tool within its specified range of performance. Overloading it may result in
the tool being damaged or risks to your safety.
• Always wear protective glasses. It is recommended that you wear suitable personal
protective equipment, such as protective clothing, non-slip safety shoes, a hard hat and ear
protection, depending on what electrical equipment is being used.
• Remove the battery before changing the accessories or storing away the tool.
This precautionary measure will ensure that the electrical tool does not start running unin-
tentionally.
• Repairs must only be performed by trained personnel using original spare
parts which can be obtained from Gebr. Titgemeyer GmbH & Co. KG.
This will
ensure that the tool remains to use and will extend the lifetime of the tool.
• Only use the designated batteries in the electrical tools.
The use of other batteries may result in injury or fire.
• Only charge the batteries in the chargers recommended by the manufacturer.
The battery may be destroyed if inserted into an unsuitable charger.
• Whenever possible, always charge the lithium-ion battery immediately after
using and never store it when empty.
The battery will keep its capacity constant for a
longer time (max. loss per year: 5%) if stored separately from the tool and charger.