Titgemeyer TIOS ER15, Руководство по эксплуатации

Страница: 9 / 28

9
Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-491 E-mail: fasteners@titgemeyer.com
L
Tb1524GB(1212)1
TIOS
®
ER15 Battery-Operated Blind Rivet Tool
Operating Instructions
WARNING!
Risk of physical injury
CAUTION !
Risk of personal injury
or damage to the tool
Maintenance and care
Service instructions
Note
EU Declaration of Conformity
Warranty
• Attach the spent mandrel container before using the tool. Failure to do so will cause the
mandrels to shoot out on breaking which may result in injury.
• Check that no parts of the tool are damaged. All damaged parts must be repaired before
being used. Working with damaged tool parts increases the likelihood of injury.
• If working at elevated heights, always wear a safety harness. Avoid dropping rivets and
avoid dropping the tool at all costs. Failure to do so may result in injuries and significant
damage.
• First remove the battery before cleaning the tool or performing any general maintenance
work.
• Keep your face away from the ventilation slots at all times.
• Avoid substances such as lubricating oil and lubricating grease coming into contact with
the skin. These substances can cause inflammation of the skin. If they do come into contact
with the skin, carefully rinse the affected area to remove them.
• Avoid working in unsecured positions, as you could fall or injure yourself.
• Maintain the rivet tool with great care. Follow the operating instructions when performing
maintenance and cleaning work. Keep the handle free from dirt and grease.
• Use the tool with care and be sure to operate it correctly. Ensure that the surrounding
conditions are right when working with this tool. Always maintain full concentration during
your work.
• Only the blind rivets specified in these operating instructions may be used.
The operator may only perform the maintenance and repair work described in these operating
instructions.
Any maintenance and repair work not described in these operating instructions must be
performed by trained personnel who have undergone a corresponding training course with
TITGEMEYER. See the address on the last page for further information on training courses.
The manufacturer accepts no liability for damage resulting from improper repairs or the use
of non-original spare parts.
The TIOS ® ER15 rivet tool has been manufactured and tested in accordance with the European
directives. The Declaration of Conformity can be found on the next to last page.
Any improper use of this rivet tool, which results in the rivet tool being damaged, will render
the warranty void.
Basic requirements for handling the rivet tool