background image

POLE HEDGE TRIMMER 400W  TTB427GTM

6. Always ensure that all handles and guards are fitted when using the product. Never 
attempt to use an incomplete product or one fitted with an unauthorised modification.

7. Always use two hands to operate a product fitted with two handles.

8. Always be aware of your surroundings and stay alert for possible hazards of which you 
may not be aware due to the noise of the product.

Maintenance and storage

1. When the product is stopped for servicing, inspection or storage, shut off the power 
source, disconnect the product from the power supply and make sure all moving parts have 
come to a stop. Allow the product to cool before making any inspections, adjustments, etc.

2. Always allow the product to cool down before storing.

3. When transporting or storing the product, always fit the cutting device transport guard.

VIBRATION AND NOISE REDUCTION

To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.

2. Ensure that the product is in good condition and well maintained.

3. Use correct application tools for the product and ensure they in good condition.

4. Keep tight grip on the handles/grip surface.

5. Maintain this product in accordance with these instructions and keep it well lubricated 
(where appropriate).

6. Plan your work schedule to spread any high vibration tool use across a number of days.

The European Physical Agents (Vibration) Directive has been brought in to help reduce hand 
arm vibration syndrome injuries to users of product’s with vibration emission. The directive 
requires manufacturers and suppliers to provide indicative vibration test results to enable 
users to make informed decisions as to the period of time a product can be used safely on a 
daily basis and the choice of tool. Further Advice can be found at www.hse.gov.uk

400w 高枝.indd   7

12-3-2   上午11:36

Содержание TTB427GTM



























Отзывы: