POLE HEDGE TRIMMER 400W TTB427GTM
2). STOPPING
a).The pole hedge trimmer will automatically stop once the
switch trigger (9) is released. The lock-off button will have to
be depressed and the switch trigger squeezed to restart the
tool.
b). When the blade has come to a complete stop, remove
plug from power source and replace the blade protection
sheath.
3). REMOVE BLADE PROTECTION SHEATH
a). Remove the blade protection sheath from the blade
before operation. (See Fig. 5b)
b). Refit the blade protection sheath when the product is not
in use, for storage or transportation.
8. GENERAL BEHAVIOUR
1). Check the product as well as accessories for damage
before each use. Do not use the product if it is damaged or
shows wear.
2). Double check that accessories and blade are properly
fixed.
3). Always hold the product the product by its handle and
gripping surface. Keep them dry to ensure safe support.
4). Ensure that the air vents are always unobstructed and
clean. Clean them if necessary with a soft brush. Blocked air
vents may lead to overheating and damage the product.
5). Switch the product off immediately if you are disturbed
while working with it and when other people enter the
working area. Always let the product come to complete stop
before putting it down.
6). Do not overwork yourself. Take regular breaks to ensure
you can concentrate on the work and have full control over
the product.
9. HEDGE TRIMMING
1). Adjust the shaft to required length as described above.
2). Cut and remove branches exceeding the cutting capacity
of this product using a proper pruner before operation.
3). Always hold the product firmly with both hands on soft
grip (15) and main handle (10). Never operate this product
using only one hand.
4). Cut both sides from the bottom cutting upwards to the
top. This will prevent any of the cuttings falling into the path
of the area still to be cut. (See Fig. 6a).
5). After cutting the sides proceed to the top.
Fig. 6a
Fig. 6b
Fig. 5b
400w 高枝.indd 19
12-3-2 上午11:36
Содержание TTB427GTM
Страница 26: ...400w indd 26 12 3 2 11 36...