Titan TTB427GTM, Инструкция по безопасности и эксплуатации

Страница: 15 / 26

POLE HEDGE TRIMMER 400W TTB427GTM
OPERATION INSTRUCTIONS
WARNING! Read all instructions carefully. Do
not connect the pole hedge trimmer to mains
s u p p ly p owe r b e fo r e i t i s c o m p l e t e ly
assembled. Always use glove s during assembly.
1.INTENDED USE
1). This pole hedge trimmer TTB427GTM is designated with a
rated power of 400Watts. This product is intended for cutting
and trimming of high and wide hedges, bushes and shrubs
in domestic gardens.
The maximum cutting capacity must be observed. Do not cut
branches exceeding the stated maximum capacity.
2). The use of this product in case of rain or humid
environment is prohibited.
3). This product is intended for private domestic use only, not
for any trade use. It must not be used for any purposes other
than those described.
2. ASSEMBLY INSTRUCTIONS
1). UNPACK
a). Unpack all parts and lay them on a flat, stable surface.
b). Remove all packing materials and shipping devices if
applicable.
c). Make sure the delivery contents are complete and free
of any damage. If you find that parts are missing or show
damage do not use the product but contact your dealer.
Using an incomplete or damaged product represents a
hazard to people and property.
d). Ensure that you have all the accessories and tools needed
for assembly and operation. This also includes proper
personal protective equipment.
2). ASSEMBLY
WARNING! Once assembled the product, the
telescopic shaft can be disassembled to
replace inner cable during maintenance.(See
"MAINTENANCE" description)
After unpacking, assembly is required.
a). Loosen the bolts (14) with a supplied hex key,
b). Align the middle shaft (4) with the lower shaft (19) and
insert it until nipple snaps into place audibly. (See Fig. 1).
c). Repeat in the same way for middle shaft (4) and upper
shaft (3).
Fig. 1
"14"
400w 高枝.indd 15 12-3-2 上午11:36