background image

POLE HEDGE TRIMMER 400W  TTB427GTM

garden power tool before making any adjustments, changing accessories, or 

storing garden power tools. 

Such preventive safety measures reduce the risk of starting 

the power tool accidentally.

4. Store idle garden power tools out of the reach of children and do not allow 

persons unfamiliar with the garden power tool or these instructions to operate 

the  garden  power  tool.

 Garden power tools are dangerous in the hands of untrained 

users.

5.  Maintain  garden  power  tools.  Check  for  misalignment  or  binding  of  moving 

parts,  breakage  of  parts  and  any  other  condition  that  may  affect  the  garden 

power tool’s operation. If damaged, have the garden power tool repaired before 

use.

 Many accidents are caused by poorly maintained garden power tools.

6. Keep cutting tools sharp and clean.

 Properly maintained cutting tools with sharp 

cutting edges are less likely to bind and are easier to control.

7. Use the garden power tool, accessories and tool bits etc. in accordance with 

these instructions, taking into account the working conditions and the work to 

be performed. 

Use of the garden power tool for operations different from those intended 

could result in a hazardous situation.

Service

Have  your  garden  power  tool  serviced  by  a  qualified  repair  person  using  only 

identical replacement parts.

 This will ensure that the safety of the garden power tool is 

maintained.

POLE HEDGE TRIMMER SAFETY WARNINGS

1.Keep  all  parts  of  the  body  away  from  the  cutter  blade.  Do  not  remove  cut 

material  or  hold  material  to  be  cut  when  blades  are  moving.  Make  sure  the 

product is switched off when clearing jammed material.

 A moment of inattention 

while operating the product may result in serious personal injury.

2.Carry  the  product  by  the  handle  with  the  cutter  blade  stopped. When 

transporting  or  storing  the  product  always  fit  the  cutting  device  cover.

 Proper 

handling of the product will reduce possible personal injury from the cutter blades.

3.Hold the product by insulated gripping surfaces only, because the cutter blade 

may contact hidden wiring or its own cord.

 Cutter blades contacting a "live" wire may 

make exposed metal parts of the product "live" and could give the operator an electric shock.

4.Keep  cable  away  from  cutting  area.

 During operation the cable may be hidden in 

shrubs and can be accidentally cut by the blade.

5.Check the hedge for foreign objects before operation, e.g. wire fences.

6.Hold the product properly, e.g. with both hands if two handles are provided. Loss of 
control can cause personal injury.

400w 高枝.indd   5

12-3-2   上午11:36

Содержание TTB427GTM



























Отзывы: