Titan TTB427GTM, Инструкция по безопасности и эксплуатации

Страница: 22 / 26

POLE HEDGE TRIMMER 400W TTB427GTM
2. LUBRICATE CUTTING BALDE
1). Keep the blade (1) clean and free of debris. Remove
trimmings.
2). Keep the blade (1) sharp to retain a good cutting
performance. Replace a worn or damaged cutting blade
with a new one of the same type.
3). Lubricate the blade (1) after each use to prolong the life
span of cutting blade and product. Apply light machine oil
along the edge of the cutting blade. (See Fig. 7).
3. REPAIR
This product does not contain any parts that can be repaired
by the consumer. Contact a qualified specialist to have it
checked and repaired.
To separate the shaft to enable cable replacement, press the
locking pin (18) with a appropriate tool and then pull middle
shaft (4) away from upper shaft (3). Repeat in the same way
for middle shaft (4) and lower shaft (19).(See Fig.8)
Now, you can replace any worn inner cable.
4. STORAGE
1). Clean the product as described above.
2). Store the product and its accessories in a dry, frost-free,
well-ventilated place.
3). Always store the product in a place that is inaccessible to
children. The ideal storage temperature is between 10 and
30°C.
4).We recommend covering the product with a proper cloth
or enclosure to protect against dust.
5. TRANSPORTATION
1). Switch the product off and disconnect it from the power
supply before transporting it anywhere.
2). Attach transportation guards as described, if applicable.
3). Always carry the product by its handle/gripping surface.
4). Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
5). Secure the product to prevent it from slipping or falling
over.
Fig. 7
Fig. 8
400w 高枝.indd 22 12-3-2 上午11:36