Titan TTB427GTM, Инструкция по безопасности и эксплуатации

Страница: 20 / 26

POLE HEDGE TRIMMER 400W TTB427GTM
6). When cutting wide hedges with the cutting area in sight
move the cutting blade lightly through the cutting surface
in a sweeping motion following the shape of the hedge or
shrub. A slight tilt downwards of the cutting blade in the
direction of motion is recommended for optimum cutting
performance.
(See Fig. 6b).
7). Move the product with slow motion forward when
cutting higher hedge and the cutting area out of sight. (See
Fig. 6c).
8). Do not to rush and do not attempt to cut too much with
one stroke of the cutting blade.
NOTE: Try to keep the cutting blade angled at approximately
15° to the cutting surface.
9). Cut in a number of stages if the area being cut is
particularly long to achieve a better result; smaller cuttings
will allow for easy composting.
NOTE: When shaping it is advisable to achieve a
trapezoidal shape (See Fig. 6d). A trapezoidal cut
corresponds to the natural growth of plants and
results in optimal hedge growth, as it will expose
more light to the bottom of the hedge.
Fig. 6c
Fig. 6d
400w 高枝.indd 20 12-3-2 上午11:36