background image

9300BU Bale Unroller 

12 

Titan Implement, LLC               

January 2016 

 

(423) 334-0012 

2.11  Federal Laws and Regulations

IMPORTANT FEDERAL LAWS AND REGULATIONS

 

CONCERNING EMPLOYERS, EMPLOYEES AND OPERATORS

This section is intended to explain in broad terms the concept and eff ect of the following federal laws and 
regulations. It is not intended as a legal interpretation of the laws and should not be considered as such.

U.S. PUBLIC LAW 91-596 (The Williams-Steiger Occupational Safety and Health Act of 1970) OSHA

This Act Seeks:

“ ... to assure so far as possible every working man and woman in the nation safe and healthful working conditions and to 

preserve our human resources ... “

DUTIES

Sec. 5(a) Each Employer -

 

(1)   shall furnish to each of its employees employment and a place of employment which are free from 

recognized hazards that are causing or are likely to cause death or serious physical harm to its 
employees.

 

(2)  shall comply with occupational safety and health standards promulgated under this Act.

 

 

(b)   Each employee shall comply with occupational safety and health standards

and all rules, regulations, and orders issued pursuant to this Act which are
applicable to his or her own actions and conduct.

OSHA Regulations

Current OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter, the 
employer shall instruct every employee in the safe operation and servicing of all equipment with which the 
employee is, or will be involved.” These will include (but are not limited to) instructions to:

 

Keep all guards in place when the machine is in operation;

 

Permit no riders on equipment;

 

 Stop engine, disconnect the power source, and wait for all machine movement to stop before servicing,
adjusting, cleaning, or unclogging the equipment, except where the machine must be running to be
properly serviced or maintained, in which case the employer shall instruct employees as to all steps and
procedures which are necessary to safely service or maintain equipment.

 

 Make sure no one is within 300 feet of machinery before starting the engine, engaging power,
or operating the machine.

EMPLOYEE TRACTOR OPERATING INSTRUCTIONS

:

1.  Securely fasten your seat belt if the tractor has a ROPS.

2.  Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.  Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.  Stay off  slopes too steep for safe operation.

5.  Watch where you are going, especially at row ends, on roads, and around trees.

6.  Do not permit others to ride.

7.  Operate the tractor smoothly - no jerky turns, starts, or stops.

8.  Hitch only to the drawbar and hitch points recommended by tractor manufacturers.

9.  When tractor is stopped, set brakes securely and use park lock if available.

Child Labor Under 16 Years Old

Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to 
know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard 
Administration, Wage & Home Division, Child Labor Bulletin #102).

Содержание 9300BU Series





































Отзывы: